Industrial Fluid Bed Dryer

Protein powder fluid bed dryer, small wind resistance, no dead Angle, easy to clean, in line with GMP requirements. The powder material used for pelleting is put into a Protein powder fluid bed dryer, and the cold air enters from the heating chamber at the rear of the main engine. Intermediate filtration. The heater is heated to the temperature required for air inlet and enters the fluidized bed. Material powder particles, in the raw material container (fluidized bed) is boiling fluidization state, after the purification of the heated air preheating and mixing, the adhesive solution atomized spray into, so that a number of particles gathered into the adhesive particles, due to the continuous drying of hot air material, so that the water in the particle evaporation, adhesive solidification, this process is repeated. The formation of ideal, uniform multi-microporous spherical particles.

Send Inquiry

Application

1. Use screw to extrude and vibrate granule and granulate granule using the methods of humidity, high speed and mixing
2. Suitable for drying humidity block or powder raw material in the fields such as pharmaceutical , food stuff , feed stuff ,
chemical industries and so on;
3. The raw material is large in granule and small in block and having adhesive property;
4. Suitable for raw materials, its volume will be changed when dry, such as devilstongue, polyacrylamide, etc

Features

The hopper is set up to stir to avoid the agglomeration of wet materials and the formation of trenches when drying.
Tipping and unloading granulation is adopted, which is convenient and fast, and the automatic feeding and discharging system can also be designed according to requirements.
Sealed to operate under negative pressure, the airflow is filtered. It is easy to operate and easy to clean. The drying speed is fast, the temperature is uniform, and the drying time of each batch is generally 20-30 minutes, depending on the material.

Model			GFG-60	GFG-100			GFG-150			GFG-200			GFG-300			GFG-500
Batch charging(kg)			60	100			150			200			300			500
Blower	Air flow(m3/h)		2361	3488			4901			6032			7800			10800
	Air pressure(mm)(H2O)		494	533			679			787			950			950
	Power(kw)		7.5	11			15			22			30			45
Agitating speed(rpm)			11
Steam consumption(kg/h)			141		170				240		282				366			451
Operating time(min)			～15-30 (According to the material)
Operating temp.			~120℃(controllable)
Height(mm)		Round	2700			2900		2900				3100		3600			3850

Hot Tags: industrial fluid bed dryer, China industrial fluid bed dryer manufacturers, suppliers, factory, coating machine for textile, grinding machine tools, coating machine for pipes, coating machine for finished products, small coating machine, used grinding machine

Protein Powder Fluid Bed Dryer

Water-dispersible Granules Fluid Bed Dryer

Send Inquiry